Installer Support

Ballistic Truckfone TF-100 & Voyager Wiring Guide for Installers

Colour Function Connection
RED PowerTo +ive (Positive) Battery, phone is 12v Compatible
BLACK Ground To -ive (Negative) battery
GREEN Ignition Truck Ignition
ORANGE Stereo Mute Mutes stereo when call in progress

Tips
Microphone is directional. Make sure the microphones front grooves are facing toward the driver. The microphone is very sensitive in direction.

---

Ballistic Line-Haul R247 Wiring Guide for Installers

Colour Function Connection
RED PowerTo +ive (Positive) Battery, phone is 12v & 24v Compatible
BLACK Ground To -ive (Negative) battery
GREEN Ignition Truck Ignition (for safety timer)
ORANGE Stereo Mute Mutes stereo when call in progress
WHITE Not in use

Back up Battery is inserted in the rear of the phone prior to installation. To insert, remove the two lower screws and remove the lower cover, then insert the battery with the gold contacts to the top left lower side and slide into position. The phone will power up from the battery, let the phone continue its boot process. Once the phone is ready (60-90 seconds), you can turn off the phone by pressing and holding the red hang-up key for “3” seconds. Replace the rear cover and screws, be careful not to over tighten screws.

Please note: Back-Up Battery is not recommended for Dangerous Goods Applications, and can be left out of phone.

Tips
Microphone is directional. Make sure the microphones front grooves are facing toward the driver. The microphone is very sensitive in its direction.